Şirket Detayları
Shijiazhuang Bang dong Pipeline Technology Co,Ltd.
Different types of flange faces are used as the contact surfaces to seat the sealing gasket material.
The type of flange | The type of sealing face | Pressure Class(PN,MPA) |
---|---|---|
Plate flange(PL) | Raise Face(RF) | 0.25-2.5 |
Flat Face( FF) | 0.25-1.6 | |
Slip on flange(SO) | Raise Face(RF) | 0.6-4.0 |
Flat Face( FF) | 0.6-1.6 | |
male and female face (MFM) | 1.0-4.0 | |
Tongue and groove face (TG) | 1.0-4.0 | |
Welding Neck Flange(WN) | Raise Face(RF) | 1.0-25.0 |
male and female face (MFM) | 1.0-16.0 | |
Tongue and groove face (TG) | 1.0-16.0 | |
Ring Joint Face(RTJ) | 6.3-25.0 | |
Flat Face( FF) | 1.0-1.6 | |
Integral type flange(IF) | Raise Face(RF) | 0.6-25.0 |
male and female face (MFM) | 1.0-16.0 | |
Tongue and groove face (TG) | 1.0-16.0 | |
Ring Joint Face(RTJ) | 6.3-25.0 | |
Flat Face( FF) | 0.6-1.6 | |
Socket Weld Flange(SW) | Raise Face(RF) | 1.0-10.0 |
male and female face (MFM) | 1.0-10.0 | |
Tongue and groove face (TG) | 1.0-10.0 | |
Thread Flange(Th) | Raise Face(RF) | 0.6-4.0 |
Flat Face( FF) | 0.6-1.6 | |
Lap joint Flange(LP) | Raise Face(RF) | 0.6-1.6 |
male and female face (MFM) | 1.0-1.6 | |
Tongue and groove face (TG) | 1.0-1.6 | |
Blind flange(BL) | Raise Face(RF) | 0.25-25.0 |
male and female face (MFM) | 1.0-16.0 | |
Tongue and groove face (TG) | 1.0-16.0 | |
Ring Joint Face(RTJ) | 6.3-25.0 | |
Flat Face( FF) | 0.25-1.6 |
Other flange facings covered by these standards include the large and small tongue-and-groove facings, and the ring joint facing specifically for ring joint type metal gaskets.
Author:
Ms. Sunny Peng
Phone/WhatsApp:
+8618333120628
September 13, 2022
September 13, 2022
September 09, 2022
September 09, 2022
Bu tedarikçi için e-posta
Author:
Ms. Sunny Peng
Phone/WhatsApp:
+8618333120628
September 13, 2022
September 13, 2022
September 09, 2022
September 09, 2022